Universal Programmers

COST  RS:- 52800/+ RS:250/-PACKING & FORWARDING CHARGES

• Computer Interface
  USB

• Universal Pin Drivers
  48 Pin ZIF socket with universal 48pin-drivers., No adapter required for DIP devices               

• Algorithms with machine architecture
  Constructed around FPGA to achieve ultra-high programming speed.                 

• Super programming speed
  Programs 89C58 in less than 4 seconds                                 

• Over current & over voltage protection
  Added on each pin, to protect programmer hardware from destroying, due to bad chip, short circuit and ESD

• User-selectable verification.
  Select verification voltage, e.g., Vcc, Vcc �5%, Vcc �10%. This verification ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention.

• Device insertion and contact checks
  Performs device insertion and contact check before it programs each device & can detect poor pin contact & devices inserted upside down or in the wrong position. This function prevents chip from getting damaged due to operator error. 

• Remote Laptop Programming
  No external AC adapter needed for most devices [for Devices having Vp < 12V]. Works on supply taken from USB port.
•  Universal PLCC, SOIC, SSOP.. to DIP adapters
  No need to purchase a new adaptor for different devices of same package.
• Over 45 different adapters
  To support PLCC, SOIC, TQFP, TSSOP & other SMD devices.
   

 Dowload List of Supported Devices

COST  RS:-43450/+RS:250/-PACKING & FORWARDING  CHARGES

• Interface with PC through USB or Parallel port.

• Supports over 14452 devices: EPROMs, EEPROMs, Flash, MCUs, PLDs, etc.

• 48 Pin ZIF socket with universal pin-drivers. to supports 8-pin to 48-pin DIP package device.

• Supports standard 5V and low voltage devices down to 1.5V

• Tests TTL/CMOS logic ICs and Dynamic/Static RAM devices also auto identifies TTL/CMOS logic IC

• Open & edit and test pattern, user can also add their own test pattern.

• Super programming speed. Programs 89C58 in less than 4 seconds

• Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP, BGA adapters ( Up to 400 pins)

• For example, the only QFP44 adapter UC-TQFP44-U1 supports all MCUs, PLDs and memory devices.

• Works on WINDOWS98 \ 2000 \ ME \ NT \ XP Operating System.

• Auto System Test.

• Automaticly Identifies the manufacturer and type of E(E)PROMs.

• Algorithms with machine architecture constructed around FPGA to achieve a ultra-high programming speed.

• Supports IC Card programming, & ISP support.

• User-friendly interfaces with pull-down menus, pop-up dialogue box and help.

• Modify algorithm parameters.

• OTP- security for AT89C5X.

• No external AC adapter needed for most devices if used with USB port.

• Over current and over voltage protection is acted to each pin to protect programmer hardware from destroy due to bad chip, short circuit and ESD.

• Mass Production mode, programmer automatically detects & programs device, you don't need to press any key.

• Device insertion and poor pin-contact check

• Support all operations, such as program, verify, blank check, read, secure, erase and so on.

• Set addresses intelligently, such as device start address, device end address, from buffer address and so on.

• Support of Binary, Intel Hex, Motorola S, Tektronix , Holtek formats and auto find format

• Manages 16 and 32-bit word split (Set Programming)

• Integrated editors for modifying JEDEC files, HEX files, and test vectors.

• Supports most compiler in JEDEC format including ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer and ISDATA

• Select chip from manufacturer or individual device.

• Set auto increment.

• Edit auto program.

• Built in 8- channel, logic analyzer, Frequency generator125Khz, & Frequency meter upto 100KHz.Device List View Details Download File

COST  RS:-23100/+RS:250/-PACKING &FORWARDING  CHARGES

Product Features

• Interface with PC through USB or Parallel port.

• Supports over 8924+ devices: EPROMs, EEPROMs, Flash, MCUs, PLDs, etc.

• 48 Pin ZIF socket with universal pin-drivers. to supports 8-pin to 48-pin DIP package device.

• Supports standard 5V and low voltage devices down to 1.5V

• Tests TTL/CMOS logic ICs and Dynamic/Static RAM devices also auto identifies TTL/CMOS logic IC

• Open & edit and test pattern, user can also add their own test pattern.

• Super programming speed. Programs 89C58 in less than 4 seconds

• Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters ( Up to 208 pins)

• For example, the only QFP44 adapter UC-TQFP44-U1 supports all MCUs, PLDs and memory devices.

• Works on WINDOWS98 \ 2000 \ ME \ NT \ XP Operating System.

• Auto System Test.

• Automaticly Identifies the manufacturer and type of E(E)PROMs.

• Algorithms with machine architecture constructed around FPGA to achieve a ultra-high programming speed.

• Supports IC Card programming

• User-friendly interfaces with pull-down menus, pop-up dialogue box and help.
  • Modify algorithm parameters.
  • OTP- security for AT89C5X.
  • No external AC adapter needed for most devices if used with USB port.
  • Over current and over voltage protection is acted to each pin to protect programmer hardware from destroy due to bad chip, short circuit and ESD.
  • Mass Production mode, programmer automatically detects & programs device, you don't need to press any key.
  • Device insertion and poor pin-contact check
  • Support all operations, such as program, verify, blank check, read, secure, erase and so on.
  • Support of Binary, Intel Hex, Motorola S, Tektronix formats and auto find format
  • Manages 16 and 32-bit word split (Set Programming)
  • Integrated editors for modifying JEDEC files, HEX files, and test vectors.
  • Supports most compiler in JEDEC format including ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer and ISDATA
  • Select chip from manufacturer or individual device.
  • Set auto increment.
  • Edit auto program.
  • Built in 8- channel, logic analyzer, Frequency generator125Khz, & Frequency meter upto 100KHz.
  Device List View Details Download File
  PROM: N/CMOS E(E)PROM, SeriesE(E)PROM, and FLASH Memory
  PLD: CPLD, EPLD, GAL, PEEL, PALCE and more
  Microcontroller: Atmel, Intel, Microchip, Temic, Philips, Syncmos, Windbond etc
  
  IC List
  TTL (74 series), CMOS (40/45 series) Logic IC
  DRAM (4164, 41464 ...), SRAM (2114, 6116 ...) memory device

   

   

COST  RS:-15500/+RS:250/-PACKING & FORWARDING  CHARGES

• Interface with PC through USB or Parallel port.

• 48 Pin ZIF socket with universal pin-drivers. to supports 8-pin to 48-pin DIP package device.

• Supports standard 5V and low voltage devices down to 1.5V

• Tests TTL/CMOS logic ICs and Dynamic/Static RAM devices also auto identifies TTL/CMOS logic IC

• Open & edit and test pattern, user can also add their own test pattern.

• Super programming speed. Programs 89C58 in less than 4 seconds

• Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP, BGA adapters ( Up to 400 pins)

• For example, the only QFP44 adapter UC-TQFP44-U1 supports all MCUs, PLDs and memory devices.

• Works on WINDOWS98 \ 2000 \ ME \ NT \ XP Operating System.

• Auto System Test.

• Automaticly Identifies the manufacturer and type of E(E)PROMs.

• Algorithms with machine architecture constructed around FPGA to achieve a ultra-high programming speed.

• Supports IC Card programming, & ISP support.

• User-friendly interfaces with pull-down menus, pop-up dialogue box and help.

• Modify algorithm parameters.

• OTP- security for AT89C5X.

• No external AC adapter needed for most devices if used with USB port.

• Over current and over voltage protection is acted to each pin to protect programmer hardware from destroy due to bad chip, short circuit and ESD.

• Mass Production mode, programmer automatically detects & programs device, you don't need to press any key.

• Device insertion and poor pin-contact check

• Support all operations, such as program, verify, blank check, read, secure, erase and so on.

• Set addresses intelligently, such as device start address, device end address, from buffer address and so on.

• Support of Binary, Intel Hex, Motorola S, Tektronix , Holtek formats and auto find format

• Manages 16 and 32-bit word split (Set Programming)

• Integrated editors for modifying JEDEC files, HEX files, and test vectors.

• Supports most compiler in JEDEC format including ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer and ISDATA

• Select chip from manufacturer or individual device.

• Set auto increment.

• Edit auto program.

• Built in 8- channel, logic analyzer, Frequency generator125Khz, & Frequency meter upto 100KHz.Device List                          Dowload List of Supported Devices

COST  RS:-2900+250/-PACKING &FORWARDING  CHARGES

Product Features

• Low cost programmer for Atmel, Philips, Dallas Microcontrollers & I2C EEPROMS.

• Single 40 Pin ZIF for 8 / 20 / 40 Pin Devices.

• Auto identification of device.

• Serial port [RS232] interface to PC.

• Supports both Parallel & ISP programming.

• Window based easy to use software.

• Works on all windows platform 95/98/2000/XP.

• Auto execution of multiple functions.

• Supports Hex / Bin & Obj file formats

• Advanced buffer editor.

      

 COST  RS:-4050/- + 250/-PACKING &FORWARDING  CHARGES

Product Features

• Single 40 Pin ZIF for 8 to 40 Pin Devices.

• Serial port [RS232] interfaces to PC.

• Automatic device identification before programming.

• Supports all operations, such as program, verify, blank check, read, secure, erase and so on.

• Auto Batch Program function for faster programming i.e. Mass Production mode.

• Programmer hardware verifies IC’s at 3 different voltage levels after programming for improved reliability.

• User-friendly interfaces with pull-down menus, pop-up dialogue box and help.

• Works on all windows platform 95/98/2000/XP.

• Supports Intel (linear & segmented) HEX (INHX8M).

• Auto execution of multiple functions.

• Easy to use integrated HEX Editor on main software window..

• Programmer firmware update through computer.

• Device insertion test.

• Support for programming only a selected memory in the microcontroller e.g. Code memory, Data memory or configuration memory.

•      Atmel 89C51/52 /55 Programmer                                                                                 

   This CHEAP Programmer supports  microcontrollers like 89C51/52/55.through PC comport . 

   COST  RS:-1200/+250/-PACKING &FORWARDING  CHARGES

  PIC PROGRAMMER   

   

  Low cost  PIC   programmer for Micrchip ics

  1.   The Programmer Tool to program  PIC IC  series flash&otp Microcontroller.

  2.   The Programmer Tool gets connected to PC on the serial port .

  3.   The Programmer Tool runs on WIN – 9X,Me,2000,XP and NT Operating Systems.

  4.      The uploader IC-PROG  helps to download Hex files from Pc to target Micro controller

  5.      MPLAB Software helps you to Assemble and for Simulation

   DEVICE SUPPORT LIST

  12C508, 12C508A, 12C509, 12C509A, 12CE518, 12CE519,12C671, 12C672, 12CE673, 12CE674, 12F629, 12F675, 16C433,16C61, 16C62A, 16C62B, 16C63, 16C63A, 16C64A, 16C65A,16C65B, 16C66, 16C67, 16C71, 16C72, 16C72A, 16C73A,16C73B, 16C74A, 16C74B, 16C76, 16C77, 16F73, 16F74,16F76, 16F77, 16C505, 16C620, 16C621, 16C622, 16C622A,16CE625, 16C711, 16C715, 16C765, 16C84, 16F83, 16F84,16F84A, 16F627, 16F628, 16F870, 16F871, 16F872, 16F873,16F873A, 16F874, 16F874A, 16F876, 16F876A, 16F877,16F877A, 16C923, 16C924, 18F242, 18F248, 18F252, 18F258,18F442, 18F448, 18F452, 18F458

                 COST  RS:-2750+250/-PACKING &FORWARDING  CHARGES

Contact : Skitronics
                G-10 Gandhi Bhavan,Chunam Lane,
                Lamington Road, Mumbai - 400 007. 
               Tel :- (022) 23887151/58 Email :- info@esskayinstitute.com